- Contact Person : Mr. Liu Frank
- Company Name : Cangzhou Hengli Pipe Fitting Manufacturing Co., Ltd.
- Tel : 86-317-2090996
- Fax : 86-317-2102902
- Address : Hebei,Cangzhou,East of Middle Section Road,Yanta Highway
- Country/Region : China
- Zip : 061300
carbon steel astm L/R180 degree Elbow
Related Product Searches:carbon steel astm L/R180 degree Elbow,High Quality,180degree elbow, pipe fittings
pipe fitting-seamless,seamly seamless, buttweld fittings,elbow,tee,reducer,cap,bend,cross
We supply carbon steel pipe fittings of different standards.
STANDARDS: ANSI B16.9 ASTM A234 WPB, JIS,DIN. ETC.SIZE:1/2"---48"THICKNESS:STD,SCH40,SCH20,SCH60,SCH80,SCH100,S , CH120,SCH160,XS,XXS,SGP, ETC.carbon steel butt welded seamless Caps is usually used for protecting the end of pipe and other fittings,so the shape is disigned according to the shape of pipe line.we also use caps to cut off the transition and the connection treat can be butt weld,socket weld and thread conection according to use requirements
Carbon steel elbow is used to be installed between two lengths of pipe or tube allowing a change of direction,usually these carbon steel elbows distinguished by connection ends, The ends may be machined for butt welding , threaded , or socketed , so the carbon steel elbows are consist of butt weld,thread elbow.socket elbow and other series.the material is selected accoding to the application use such as high temperature use,sanitary fitting,regular industrial use etcReducer is a kind of fitting that be used for reducing piping size. There are 2 types reducer as follows:a. Concentric reducer: have a central axis (centerline) of the section between the large and small.b. Eccentric reducer: the central axis has a different (offset) between a large section and small.Concentric reducer is most commonly used and often eccentric reducer used in piping in about pump and pipe rack area.
A tee is also called triplet,three way and "T" pieces and it can be used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but 'reducing' tees are available as well. it means the one or two ends are differ in dimension.due to thisdimension differ,the makes the tee fittings with the capacity to control the volume when requried
carbon steel astm L/R180 degree Elbow
